Solar Roof Mounting Industry Review: Technology Evolution, Product Innovations, and Market Landscape
2024-09-25
I. Global Photovoltaic Mounting Market Size in 2024
From a market size perspective, the global solar photovoltaic mounting systems market was valued at approximately USD 16.28 billion in 2024, and is projected to reach USD 28.4 billion by 2031, growing at a CAGR of about 7.9%. In the European market, the solar PV mounting systems market was valued at approximately USD 43.52 billion in 2024, and is expected to grow at a CAGR of about 9% to reach USD 118.11 billion by 2035.
Notably, by 2024, the cost of PV systems had dropped to below RMB 3/W, while mounting system and installation costs remained relatively stable at around RMB 0.20/W. The continued decline in costs has become a strong driver for global PV installation growth.
II. Technology Trends: From Fixed to Smart, From Rigid to Flexible
2.1 Accelerated Adoption of Tracking Mounts
In 2024, PV mounting systems are rapidly evolving from traditional fixed mounts to tracking mounts – an industry consensus on an inevitable trend. Tracking mounts automatically adjust orientation based on sunlight conditions, capturing more solar radiation under equivalent conditions, effectively increasing system power generation, while also smoothing power output and helping maintain grid stability.
In terms of power generation benefits, compared to fixed mounts, tracking mounts achieve optimal angle alignment by tracking the sun’s trajectory in real time, delivering a power generation gain of 15%–20%. Combined with intelligent tracking systems, this further increases PV plant yields. Tracking mounts mainly consist of three components: structural system, drive system, and control system. The drive system positions PV modules at the optimal angle to track the sun.
According to Orient Securities, global tracking mount shipments are expected to reach 95 GW, 115 GW, and 135 GW from 2024 to 2026, respectively. The domestic market in China is equally promising, with a compound annual growth rate exceeding 20% over the next five years.
Globally, more than 40% of ground-mounted PV systems already use tracking mounts, with this figure exceeding 80% in some countries. In 2023, global PV tracking mount shipments reached 92 GW, a year-on-year increase of 28%. Since 2024, power generation companies such as China Energy Engineering Group and China Railway 11th Bureau have publicly conducted centralized procurement of PV mounts, in which tracking mounts have secured a place.
2.2 Flexible Mounts Emerge as a Strong Contender
Flexible PV mounts became a highly noticed technology direction in 2024. Their high clearance and large-span characteristics increase the installed capacity of PV plants by 30%–50% in different scenarios, while fully utilizing the space beneath the panels to realize the advantages of “PV+”.
In terms of application scenarios, flexible PV mounting systems have been widely adopted in various settings such as mountainous agrivoltaics, fishery-PV complementarity, coastal mudflats, desert and gobi land reclamation, and commercial & industrial distributed projects, forming a trend of significantly replacing traditional fixed mounts in most scenarios. Leveraging self-adaptive bidirectional support flexible PV mounting systems, production by just a few companies reached 188.5 MWp in 2024 alone.
For example, Huiyao Pin Shang Energy Technology showcased its three-cable space truss structure flexible PV mounting system at SNEC 2024, with a design wind resistance of up to Force 14, validated by wind tunnel tests at Southwest Jiaotong University. Since the start of commercial operations, the company has accumulated over 3 GW of projects under construction or already in operation using flexible PV mounts.
The performance of flexible mounts under extreme weather was also proven in practice – DAS Solar’s flexible mount fishery-PV complementary project in Ding’an, Hainan successfully withstood Typhoon “Yagi” (Category 17 strength), with all flexible mounts supplied by DAS Solar, which also provided design, construction, and installation services.
III. Product Innovation: Enhancing Safety and Efficiency
3.1 Breakthrough in International Product Certification
In 2024, the global roof mounting industry achieved important progress in safety certification. DCE Solar’s Eco-Top roof mounting system successfully passed UL 3741 certification, ensuring compliance with PV hazard control requirements of NEC 2020. This certification not only validates product quality but also eliminates the need for module-level power electronics, saving USD 0.09 to 0.13 per watt in material and labor costs. The Eco-Top system itself requires five times fewer mechanical connectors and ballast blocks, saving USD 0.03 to 0.06 per watt in material and labor costs, while the integrated cable management system eliminates the need for additional wiring accessories.
3.2 Patent Breakthroughs in Metal Roof Mounts
S-5!, a global leader in metal roof solar attachment solutions, added 50 new patents in 2024 alone, bringing its total patent count to 194 since its first patent application in 1991. These patents were granted by patent offices across multiple global regions, covering 13 countries and regions including the EU (12 patents), the United States (8 patents), China (9 patents), India (6 patents), and Australia (4 patents).
Rob Haddock, Founder and CEO of S-5!, stated: “We are seeing growing market demand for affordable, easy-to-install roof attachment products that are certified, engineered, and designed for metal roofs.” In 2024, the company prioritized third-party testing and certification, achieving FM Approvals certification (FM 4478 standard). Its PVKIT HUR 2.0 rail-less direct-attachment mounting system withstands wind uplift forces up to 150 psf, demonstrating excellent performance in high-wind and hurricane zones. Its standing seam clamps also obtained product certification for high-wind and hurricane zones in Florida.
3.3 New Flat Metal Roof Mounts in France
EPC Solaire, a mounting system supplier based in Lyon, France, launched in December 2024 a PV system solution for retrofitting flat metal roofs on commercial and industrial buildings. The system is made of French-sourced aluminum and allows PV modules to be installed without any structural modifications. It replaces traditional insulation and waterproofing materials (such as rock wool or bitumen, 20 kg/m²) with a lightweight alternative (8 kg/m²). Integrated rails distribute loads evenly across the surface, preventing localized overloading or damage. The system provides a thermal resistance of R=4.5 m²K/W and a waterproof membrane designed for a 25-year service life.
IV. Chinese Patent Achievements: Intense Technology Innovation
In 2024, Chinese companies also achieved a wealth of patent results in the field of roof PV mounting:
Xiamen Yoogu Solar obtained a patent for “a quick, stable and enhanced PV mounting installation structure.” Through a unique combination of upper purlins, lower purlins, and snap-fit components, it enhances the stability and strength of the mounting assembly, offers good versatility for different solar panel sizes, and provides easy installation with high efficiency.
Dingsheng PV obtained a patent for “a waterproof PV mount suitable for sunrooms.” By incorporating a first flow-guiding frame and a second flow-guiding frame, it uses guiding channels to effectively drain rainwater, preventing water accumulation on the back of solar PV panels and avoiding water damage.
The Third Construction Co., Ltd. of China Construction Eighth Engineering Division obtained a patent for “a foldable PV panel structure for container houses,” which increases power generation.
China Construction Fourth Engineering Division obtained a patent for “a PV roof for low-carbon buildings.” The design uses an installation structure fixed to support stringers on the roof, avoiding damage to the roof support structure’s strength. “Z”-shaped support members pass through gaps between adjacent tiles without damaging the tiles, preserving the roof’s structural strength and waterproof performance.
Yinkaitai Energy obtained a patent for “an east-west slope color steel tile roof PV mount,” which effectively increases the unit power generation of PV projects on east-west slope color steel tile roofs, lowering investment costs and improving power generation efficiency.
Sichuan Huantai Electric Power obtained a patent for “a lightweight PV mount suitable for building roofs and the ground.” By eliminating column and rafter structures, it reduces the number of structural parts during assembly, facilitating installation and saving time and effort.
V. Policy Environment: Continuous Refinement of High-Level Frameworks
In 2024, China’s central government continued to promote the development of roof PV. In October 2024, the National Development and Reform Commission and other authorities issued guidelines clearly stating the need to “promote the addition of PV systems on existing building roofs, and encourage the installation of PV systems on new factory buildings and new public buildings wherever possible.”
The National Energy Administration (NEA) is also actively advancing the standardized management of distributed PV. In 2024, the NEA initiated revisions to the Administrative Measures for the Development and Construction of Distributed PV Power Generation, clarifying definitions, record-filing management, construction and operation management, grid connection, and other relevant content. The revised measures emphasize that local authorities shall not control roof or other distributed PV development resources through franchising or similar means, nor restrict qualified investment entities from participating equally in the development and construction of distributed PV.
Regarding market promotion, Guangdong Province issued the Guangdong Provincial Pilot Work Plan for Promoting “PV + Buildings” in Counties, promoting large-scale application of distributed PV at the county level. NEA data shows that by the end of June 2024, China’s total installed PV capacity was 710 GW, of which distributed PV accounted for 310 GW (about 44%); in the first half of 2024, newly added distributed PV capacity reached 52.88 GW, accounting for over half of total new PV capacity.
VI. Export Data: Volume Growth with Stable Prices, Global Competitiveness Continues to Strengthen
In 2024, China’s solar mounting exports showed a trend of “rising volume with stable prices.” According to customs data, China’s solar mounting export volume rose to 1.73 million tonnes in 2024, a year-on-year increase of 13.93% from 2023. Although export value declined to USD 4.455 billion, down 5.06% from 2023, this partially reflects the industry’s effort to offset price declines through increased export volume, indicating an overall healthy market development.
China’s solar mounting export markets are mainly concentrated in Asia, Europe, and North America. Demand from Southeast Asian countries continued to grow; European market demand remained stable, especially in Germany, the Netherlands, and other countries, where Chinese products have secured a good market share due to high cost-performance and quality service. In 2024, China’s PV product exports exceeded USD 200 billion for the fourth consecutive year, leading global green trade.
VII. International Exhibition Activity: Chinese Companies Active Worldwide
At international exhibitions, Chinese mounting companies actively showcased their technological capabilities. In September 2024, Mibet Energy exhibited its multi-scenario mounting systems at Solar & Storage Live UK. Its full-wind-shielding matrix system S10 can be installed on flat roofs without penetration, attracting customer interest thanks to its multi-directional wind protection, short-side module fixation, high level of factory pre-assembly, and flexible ballast adjustment.
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17