Review: Market Trends and Outlook for HDG Steel Solar Mounts
2024-09-28
Introduction
In 2024, the global photovoltaic (PV) industry entered a new phase characterized by “price reduction and volume increase.” According to industry data, as of November 2024, global cumulative PV installed capacity is expected to reach approximately 2 terawatts (TW), representing significant year‑on‑year growth. Against this backdrop, demand for PV mounting structures – the “skeleton” that supports solar modules – especially hot‑dip galvanized (HDG) steel mounts, has risen rapidly. According to the China Business Industry Research Institute, the size of China’s PV mounting structure market is expected to reach RMB 25.3 billion in 2024. With ongoing technology iteration and improved standards, HDG solar mounts are rapidly evolving toward greater efficiency, durability, and standardization.
1. Market Trend: Cost Advantage Drives HDG Steel’s Dominance
Among PV mounting materials, steel mounts – which combine low cost and high strength – have consistently held a dominant position. According to statistics, steel mounts using galvanized or zinc‑aluminum‑magnesium coated steel account for more than 90% of all PV mounting structural materials. Compared with aluminum alloys, hot‑dip galvanized steel, with its excellent cost‑effectiveness, superior corrosion resistance, and mature processing technology, has become the first choice for ground‑mounted utility‑scale power plants, commercial & industrial rooftops, and agro‑PV projects. Especially in large‑scale base projects, HDG steel mounts, thanks to their high load‑bearing capacity and stability, provide a solid guarantee for the PV plant’s service life of more than 25 years.
2. Policies & Standards: Accelerated Industry Standardization
In 2024, notable progress was made in the standardization of China’s PV mounting structure industry. Several key national and industry standards were issued, providing a scientific basis for the application of HDG steel. On March 29, 2024, group standard T/CSTA 0077‑2024 “Continuously hot‑dip galvanized and zinc‑aluminum‑magnesium alloy coated steel strip for photovoltaic support” officially came into force. This standard specifies material specifications, performance, and test methods, and applies to coated steel strips with a thickness of 0.60 mm to 4.00 mm, providing a unified technical basis for the entire industry chain.
In addition, the industry standard “Continuously hot‑dip zinc‑aluminum‑magnesium alloy coated steel sheet and strip for photovoltaic supports”, led by Jiuquan Iron & Steel (JISCO), is also being actively drafted. This standard is the first to be tailored specifically for downstream users, with a focus on specifying material properties and coating corrosion resistance to meet the demands of PV mounting structures operating for 25 years in various complex climates.
For anti‑corrosion engineering, domestic utility‑scale PV projects explicitly require that hot‑dip galvanized coatings comply with GB/T 13912‑2020. For steel of different thicknesses, this standard specifies average coating thickness requirements – typically for 1.5 mm to 3 mm steel, the average galvanized coating thickness shall not be less than 65 μm, and the minimum local thickness shall not be less than 45 μm – ensuring long‑term protection even in harsh environments such as salt spray and sandstorms.
3. Technology Innovation: Integration of New Materials & Processes
Although traditional hot‑dip galvanizing technology is mature and stable, the industry’s growing focus on corrosion resistance and environmental protection in 2024 has driven the rapid growth of zinc‑aluminum‑magnesium (ZAM) coated materials. ZAM is attracting great attention because of its self‑healing ability and significantly better corrosion resistance (6‑15 times that of pure zinc coatings). Data show that in the first half of 2024, China added or upgraded seven ZAM production lines, with a new capacity of more than 2.1 million tons, reflecting strong market demand for high‑performance materials.
In the international market, innovative processes have also produced notable achievements. For example, Spanish company Elementos de Sujeción Galvanizados (ESG) launched a new hot‑dip galvanized ground screw anchor in October 2024. This product uses a hot‑dip galvanized coating, meets the UNE EN ISO 1461 standard, and provides more than 30 years of maintenance‑free corrosion resistance. It can be directly screwed into the ground without excavation or concrete foundations, greatly reducing installation time and cost, and provides an efficient solution for PV projects in a wide variety of soil conditions. Also, in August 2024, Chinese mounting structure manufacturer FarSun launched a large ground steel mounting system made of Q235B hot‑dip galvanized steel, capable of withstanding wind speeds up to 60 m/s and snow loads up to 1.6 kN/m². The system has been successfully applied in several 6.5 MW‑scale mountain projects.
4. Key Project Case Studies: HDG Mounts Deployed Worldwide
In 2024, many domestic and international projects using HDG steel mounts were successfully advanced, demonstrating the excellent performance and global suitability of this product family.
1. PowerChina 2024‑2025 Centralized Procurement of Fixed PV Mounts (China)
In September 2024, Sinohydro Engineering Bureau 9 of PowerChina launched its annual centralized framework procurement for fixed PV mounts, with an estimated total weight of 40,000 tons. The tender documents explicitly require that the main components of the mounts be made of Q355B hot‑dip galvanized steel, with an average galvanized coating thickness not less than 65 μm and a minimum local thickness not less than 45 μm. This high anti‑corrosion standard represents the current strict reliability requirements of large Chinese state‑owned enterprises for PV power plants.
2. Kseng Solar 3 MW Hot‑Dip Galvanized Carbon Steel Mounting Project (Saudi Arabia)
Kseng Solar successfully delivered a 3 MW ground‑mounted solar project in Riyadh, Saudi Arabia, between September and December 2024. The project uses high‑strength carbon steel hot‑dip galvanized (HDG) mounts. The specially designed double‑column structure is compatible with both concrete block foundations and ground screws, ensuring long‑term stability in Saudi Arabia’s severe high‑temperature and sandstorm environment.
3. HBIS Tangsteel’s First Export of High‑Yield‑Strength Steel to Europe
In March 2024, HBIS Group’s Tangsteel produced and exported 1,800 tons of high‑yield‑strength PV mounting structure steel, grade S550MC, to Europe. The product, which is processed with a galvanized coating, will be used to manufacture high‑strength PV mounting structures, marking recognition of China’s high‑performance PV steel in the high‑end international market.
5. Price Dynamics: Market Correction
In terms of pricing, the PV mounting structure market in 2024 showed an overall high‑level downward correction due to fluctuations in upstream commodity prices and industry capacity expansion. Taking the Tianjin market as an example, from July to October 2024, mainstream hot‑dip galvanized PV mounts (specification 41*41*2.0, material Q235B) fluctuated in the range of RMB 6,300‑6,500 per ton. As of mid‑October 2024, prices for some specifications continued this trend. The rational decline in the PV industry chain price level has accelerated cost optimization for power plant investment, providing a more favorable market environment for downstream applications.
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17