Solar PV Systems Industry Review: Global Cumulative Capacity Exceeds 2 TW, China Leads, n-Type Technology Fully Replaces PERC
2024-09-14
Market Overview: New Installations Hit Record High, China Accounts for Half
According to data released by the IEA-PVPS (International Energy Agency Photovoltaic Power Systems Programme), global PV installed capacity jumped from 1.6 TW in 2023 to over 2.2 TW in 2024, with grid-connected additions exceeding 600 GW. In terms of new installations, China maintained the top spot with 277 GW to 357 GW, accounting for nearly 60% of the global total. It was followed by the United States (~47 GW), India (~32 GW), and Germany (~17 GW). Approximately 35 countries formed annual GW‑scale markets, and more than 40 countries have now accumulated over 4 GW of capacity.
By installation type, utility‑scale PV plants still dominated globally, accounting for about 57% of total capacity, while distributed PV (including grid‑connected and self‑consumption systems) accounted for roughly 43%. In China, utility‑scale PV added 159 GW, up 33% year‑on‑year; commercial & industrial (C&I) PV added 88.63 GW, up 68%; while residential rooftop PV fell significantly to 29.55 GW, a 32% decrease from the previous year. The market share of residential PV dropped to about 11%, reflecting a market shift from residential to C&I and ground‑mounted plants.
Technology Evolution: n‑Type Fully Replaces PERC, Efficiency Records Repeatedly Broken
2024 marked a year of technological route transformation. n‑type TOPCon technology fully replaced p‑type PERC as the market mainstream. According to IEA‑PVPS, TOPCon’s market share jumped from around 30% in 2023 to 70%, while PERC fell sharply from 64% to about 20%.
At the laboratory level, efficiency records were frequently broken. Perovskite/silicon tandem cells became the most watched next‑generation technology. LONGi Green Energy successively achieved certified efficiencies of 33.9% and 34.6%, continuously exceeding the Shockley‑Queisser limit of single‑junction semiconductor photovoltaic materials; the relevant results were published in Nature. The French National Institute for Solar Energy (INES) together with 3SUN obtained a certified efficiency of 29.8% on a 9 cm² perovskite/silicon tandem cell. In the Chinese market, single‑junction perovskite cells exceeded 26.7% efficiency, and n‑type silicon cells exceeded 27%. Organic solar cells also crossed the 20% efficiency mark for the first time, achieving a power‑to‑weight ratio of 1.9 W/g. The technology race is shifting from single efficiency indicators to comprehensive competition in stability, reliability, and cost‑effectiveness.
On the manufacturing side, global PV module production reached 728 GW, up 18.5% year‑on‑year; total global module manufacturing capacity rose to 1,405 GW/year, of which 83% is located in China. Chinese companies continue to hold a central position in the global supply chain.
Industry Divergence: Technological Barriers Become a “Safe Harbor”, Profitability Diverges Sharply
The PV industry in 2024 experienced a “fire and ice” pattern. On one hand, inverter and equipment manufacturers were the biggest winners. Among A‑share listed PV companies, Sungrow Power posted net profit of 11.036 billion yuan, up 16.9% year‑on‑year; equipment manufacturer Laplas recorded net profit of 729 million yuan in its first year after listing, while Jietai CNC and JingSheng Machinery each exceeded 2 billion yuan.
However, the module segment faced enormous pressure. In 2024, prices of wafers, cells, and modules continued to decline, with module prices dropping by more than 29% year‑on‑year, and wafer prices falling by over 50%. Module manufacturers suffered from the situation of “the more they sell, the more they lose”. Among the world’s top four module shippers, only JinkoSolar managed a marginal net profit of 99 million yuan; LONGi, Trina Solar, and JA Solar all recorded varying degrees of losses. Total Chinese PV product exports reached about US$32.02 billion, down 33.9% year‑on‑year.
Leading Companies: Top 4 Structure Stable, Chinese Manufacturers Dominate the Ranking
In the global PV module shipment rankings, JinkoSolar, LONGi, JA Solar, and Trina Solar continued to occupy the top four positions. JinkoSolar topped the list with shipments of approximately 92.87 GW, LONGi shipped about 82.32 GW, JA Solar about 79.45 GW, and Trina Solar ranked fourth. The top five module manufacturers shipped a total of 370.35 GW, accounting for 71.34% of the total shipments of the top 10. The combined shipments of the top 10 manufacturers exceeded 500 GW, with Chinese companies holding an absolute leading position. The shipment gap among the top four vertically integrated manufacturers exceeded 30%, highlighting a growing “winner‑takes‑more” trend.
Policy Leadership: Multidimensional Support Promotes Deep Integration of Distributed PV and Rural Revitalization
In 2024, policies at both national and local levels accelerated the integration of PV applications with rural revitalization. Danfeng County in Shaanxi implemented the “Thousand Villages, Ten Thousand Households ‘PV+’ Rural Revitalization Demonstration Project”, with each administrative village building about 2 MW of capacity – aiming to complete about 12 whole‑village rooftop distributed PV solar‑heating demonstration projects by the end of the year. Jiashan County in Zhejiang launched a pilot for whole‑village (community) distributed PV promotion, providing a one‑time subsidy of 200,000 to 300,000 yuan to the village collective, financed by the county government. Chengdu City in Sichuan granted a 0.3 yuan/W subsidy to investors based on installed capacity, plus a generation subsidy of 0.05 yuan/kWh. Suzhou provided a 30% financial subsidy to areas included in the national pilot county programme. These precise local policy measures provide solid institutional guarantees and financial support for the synergistic development of distributed PV and rural revitalisation.
Recycling System Accelerated: Simultaneous Progress in Standards and Industrial Layout
As PV systems enter a peak retirement period, recycling became a key focus in 2024. The Ministry of Ecology and Environment accelerated the formulation of technical specifications for pollution control of waste PV modules, clarifying environmental requirements for each step – disassembly, collection, transportation, dismantling, comprehensive utilisation, and disposal. The national standard General specification for recycling and cascade utilisation of retired PV modules (GB/T 45075‑2024) was officially released, further promoting standardisation of the full life‑cycle closed‑loop management of PV. Jiangsu, Hebei, Qinghai, and other provinces actively explored local recycling standards and systems in the context of “zero‑waste city” construction.
Outlook and Summary
In 2024, solar PV systems reached new historical highs in “quantity” while also achieving key leaps in “quality”. n‑type technology fully replaced conventional technologies, tandem cell efficiency continues to push theoretical limits, and the industry is shifting from low‑efficiency capacity competition to technological strength competition. However, the overcapacity and price declines that led to sharp profitability divergences remind the industry of the urgency to shift from “speed and scale” to “quality and efficiency”. Looking forward to 2025, with rising demand from emerging markets, accelerating technological upgrades, and continued capacity consolidation, the industry is expected to enter a healthier growth cycle.
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17