Blog
Solar PV Mounting Components
2025-02-12
1. Main Structure Components
- Solar Rails
- Long aluminum profiles that support PV panels.
- Mid Clamps
- Clamps between two panels to hold them to rails.
- End Clamps
- Clamps at the outer edges of the panel array.
- Mounting Brackets / Legs
- Angle brackets, triangle brackets, L-brackets for tilt and support.
- Purlins / Beams
- Main horizontal supports (especially in carports, ground mounts).
- Posts / Columns
- Vertical support poles for ground mounts and carports.
2. Roof Mount Components
- Roof Hooks
- Attach rails to tile / asphalt / shingle roofs.
- Roof Clamps
- For standing seam, trapezoidal, corrugated metal roofs (no drilling).
- Flashing
- Waterproof plates to seal roof penetrations.
- EPDM / Butyl Rubber Gaskets
- Waterproof and anti-scratch pads under clamps/hooks.
3. Ground Mount Components
- Ground Screws / Helical Piles
- Screw-in foundations (no concrete).
- Concrete Piers / Footings
- Cast-in-place or precast concrete foundations.
- Ground Mount Brackets
- Adjustable tilt supports, cross arms, stabilizers.
- Anchor Bolts / Foundation Bolts
- Connect structure to concrete.
4. Fasteners & Hardware
- Bolts (M8, M10, M12)
- Nuts (flange nuts, nylon lock nuts)
- Crusty Nuts / Nuts with PVC Caps
- For corrosion protection.
- Washers (flat, spring, lock)
- Stainless Steel Screws
- All outdoor use: 304 / 316 grade.
5. Cable Management Parts
- Cable Clips / Cable Ties
- UV-resistant for PV cables.
- Cable Tray
- For long DC/AC cable runs.
- Cable Clamps
- Secure cables to rails or structures.
6. Special & Protective Parts
- Grounding Lugs / Ground Clips
- For electrical safety and bonding.
- Wind Deflectors / Wind Dampers
- Reduce uplift on flat roofs.
- Spacer Blocks
- For rear tilt and ventilation.
- Anti-Theft Bolts / Security Clips
- Prevent panel theft.
7. Carport & Large Structure Parts
- Cantilever Brackets
- Overhang support for car parking.
- Gutter / Drainage Profiles
- Waterproof carport systems.
- Base Plates / Flange Plates
- Connect posts to foundations.
- Cross Braces / Diagonal Braces
- Increase stability against wind.
8. Common Materials (2024 Standard)
- Aluminum 6063-T5 / 6005-T5
- Lightweight, corrosion-resistant.
- HDG Steel (Hot-Dip Galvanized)
- High strength, low cost.
- ZAM Steel (Zn-Al-Mg)
- 5–10x better corrosion.
- Stainless Steel 304 / 316
- Coastal / high-salt environments.
- EPDM / Nylon / PA12
- UV-resistant plastic parts.
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17