Solar PV Project Cable Tray (Wire Mesh Tray) Industry Development Recap & Annual Review – Project Review, Tech Innovation, Patent Trends, and Standard Upgrades
2024-09-25
I. Typical Cable Tray Applications in 2024 Solar PV Projects
In 2024, the growth of PV power stations worldwide drove continued demand for cable trays. The following are representative projects:
1. Lecong Steel World Distributed PV Project – Foshan, Guangdong, China
In November 2024, the Jianjiang Company of PowerChina Hydropower Bureau 7 completed a cable tray procurement project for the stainless steel Area A PV project in Lecong Steel World, Foshan City. The project plans to utilize 17 factory buildings with a total area of about 230,000 m², with a total planned capacity of 20,176.75 kWp, using 36,685 units of 580 Wp monocrystalline modules. The procurement list included aluminum alloy cable trays ranging from 50×50 to 800×100 mm, totaling over 12,000 meters, plus a large number of elbows, tees, crosses, and other fittings, reflecting the refined demand for cable trays in large distributed PV projects.
2. N-type High-efficiency Solar Cell Project – Suzhou, Anhui, China
On November 15, 2024, the first-phase electromechanical EPC tender was launched for the new-generation N-type high-efficiency solar cell project in Suzhou High-tech Zone, covering supply, transport, commissioning, acceptance, and warranty of cable trays, busways, and electrical accessories. This project represents the large demand for cable tray systems from the PV manufacturing side, with industry-leading investment scale and technical requirements.
3. Taihu Zhigu Distributed PV Project – Wuxi, Jiangsu, China
In November 2024, the Jiangsu branch of Tieta Energy Co., Ltd. launched the distributed PV system integration project for Wuxi Taihu Zhigu, including procurement of hot-dip galvanized ladder-type cable trays and cable accessories. The project uses 580 Wp bifacial monocrystalline silicon modules, three 100 kW inverters, and a GGD grid-tied cabinet. Cable trays were included as key auxiliary materials, and the successful implementation set a benchmark for PV construction in industrial parks in East China.
4. 56 MWp PV Panels & Ancillary Facilities Project – Wenling, Zhejiang, China
In September 2024, Wenling Qianggong New Energy Technology Co., Ltd. initiated a procurement project for PV panels and ancillary facilities with a total capacity of about 56 MWp, covering 16 towns/subdistricts and the Eastern New Area of Wenling. The project includes full-scope work such as installation of aluminum alloy supports, rooftop PV DC cable trays, DC cable laying, external wall AC cable tray installation, and AC cable laying. The cable tray section involves both DC and AC side systems, imposing clear requirements on product specification adaptability and construction efficiency.
5. International Case: 3.3 MW Rooftop PV Plant – Port of Koper, Slovenia
In April 2024, the Port of Koper, Slovenia, commissioned one of the country's largest rooftop PV plants with 3.3 MW capacity, covering about 15,000 m² of a general cargo warehouse roof. The total investment was €2.8 million. Due to the coastal location and risk of salt spray corrosion, an aluminum support structure with stainless steel cable trays and covers was adopted. Nearly 3,000 meters of stainless steel cable trays were installed to protect cables from seawater, salt spray, sunlight, rodents, and other damage, providing a reliable reference for cable management in coastal PV projects.
6. Factory Rooftop PV Project – Suzhou Industrial Park, Jiangsu, China
In January 2024, initiated by government authorities, a large-scale solar PV system was built on factory rooftops in Suzhou Industrial Park. The project used both white channel-type cable trays and ladder-type cable trays. The channel type provided physical protection against sun and rain, while the ladder type allowed air circulation to prevent overheating. The combination ensured reliable long-term system operation.
II. 2024 Market Size Review of PV Mounting Systems & Cable Trays
The global solar PV mounting systems market continued its rapid growth in 2024. According to QYResearch and other agencies, the global solar PV mounting systems market in 2024 was approximately RMB 117.71 billion, and is expected to approach RMB 199.84 billion by 2031, representing a CAGR of about 7.4% over the next six years.
Regionally, Asia-Pacific continued to dominate the PV mounting market, with China and India as major growth engines. Benefiting from the world's largest PV installations and concentrated mounting manufacturing capacity, China's PV mounting market reached approximately RMB 25.3 billion in 2024, up 6% year-on-year. In the first half of 2024, the tender volume for PV mounts in China approached 23 GW, with fixed mounts still accounting for about 82% of the volume, though tracker mounts steadily gained share in large utility-scale projects.
In the cable tray sub-sector, 2024 was also a fast-growing year. Thanks to the continued expansion of PV power station construction, the entire supply chain from raw material procurement to finished products showed strong growth momentum.
III. 2024 Technological Innovations in Wire Mesh Cable Trays
1. Excellent Heat Dissipation Through Open Structure
Wire mesh cable trays feature a honeycomb steel wire welded structure that fully exposes cables to ambient airflow, providing three core advantages: (1) significantly improved heat dissipation, reducing cable surface temperature by 5–8°C (a major internet company reported 30% better efficiency than closed trays); (2) high installation flexibility – trays can be cut, bent, and joined on site without special tools to quickly form complex shapes like 90° elbows and tees; (3) easier maintenance – open structure makes cable status immediately visible, reducing fault location time from an average of 2 hours to 15 minutes.
2. Material & Corrosion Resistance Upgrades
In 2024, significant breakthroughs were made in metal mesh tray materials, forming three main systems: hot-dip galvanized steel, 316L stainless steel, and aluminum alloy, suitable respectively for corrosive environments in chemical plants, coastal salt-spray areas, and lightweight high-rise buildings. For example, on an offshore wind platform in Zhuhai, the use of 316L stainless steel mesh trays achieved 25-year maintenance-free operation, reducing total life-cycle cost by 60%. Given the outdoor PV environment (intense UV, wide temperature swings, coastal salt spray, dust accumulation, and animal interference), stainless steel wire mesh trays are considered the most reliable cable management choice for corrosive or high-humidity areas.
3. Preformed Fittings Reduce On-site Fabrication Costs
In January 2024, Snake Tray (USA) launched a line of preformed wire mesh basket tray products including elbows, tees, and cross fittings. The 801 Series Mega Snake offers strength comparable to steel ladder trays but is lighter, easier to handle, and lower in cost, requiring no on-site cutting or grinding. The integrated suspension system allows installation in minutes, significantly reducing labor costs and material waste.
4. Emerging Third-party Innovative Solutions
In September 2024, at the RE+ Clean Energy Expo in the USA, Affordable Wire Management (AWM) introduced three new products for utility-scale solar projects. Among them, the Sumac Rail is a sag-less cable management product that can replace traditional cable trays, reducing the number of piles and lowering steel costs, particularly suitable for short-distance applications requiring precise cable routing.
IV. 2024 Domestic PV Cable Tray Patent Activity
In 2024, Chinese companies obtained several important patents in the PV cable tray field, demonstrating strong innovation vitality.
| Date | Patentee | Patent Title | Key Innovation |
|---|---|---|---|
| Dec 2024 | Matesi Comm Tech (Suzhou) | A special wire mesh cable tray for PV cables | Equipped with multiple first support bars and L-shaped stop bars to create multiple placement zones for batch/type separation, preventing tangling and facilitating rapid fault repair |
| Dec 2024 | Tongwei Solar (Yancheng) | Cable storage device, junction box, and PV module | Patent authorization No. CN 222138411 U, aimed at reducing the impact of cables on PV module production and installation |
| Nov 2024 | China Energy Engineering Group Anhui Electric Power Design Institute | A cable tray for large PV power stations with dust/sand protection | Uses snap-fit structure + sealing strips to enhance trough body and cover sealing, preventing dust ingress that affects cable protection; also includes trough support structure to improve tray strength; specifically designed for large desert and barren-land PV stations |
| Sep 2024 | Guangdong Green Build Alliance New Energy Tech | A special cable support for PV cables | Tray unit + connection assembly + expansion structure design to avoid excessive expansion joints, reducing transport and purchase costs |
| Dec 2024 | Anhui Province Energy Trading Co. | A composite roof PV walkway and cable tray | Integrates walkway and cable tray into a single structure; when the load-bearing plate is flipped open, the channel groove can serve as a cable tray, saving space and allowing more area for PV modules |
Case analysis: The composite roof PV walkway and cable tray by Anhui Province Energy Trading is especially noteworthy. It combines the maintenance walkway with cable routing, solving cable management while ensuring safe access on rooftop PV projects – embodying the “functional integration” design concept in PV cable trays. The dust/sand-protected tray by China Energy Engineering Anhui Electric Power Design Institute fills a gap for extreme environments, providing a targeted solution for large northwestern ground-mounted stations.
V. 2024 Upgrades to PV Cable Management Standards
2024 was an important year for cable tray standardization, with multiple national and group standards issued intensively to guide high-quality industry development:
1. T/CI 398-2024 Corrosion-resistant and fire-resistant metal cable trays
Effective July 1, 2024, this group standard was issued by the China International Association for Science and Technology Promotion. It comprehensively specifies terminology, classification, technical requirements, test methods, and inspection rules for steel or aluminum alloy cable trays used in indoor/outdoor industrial and civil buildings as well as high/low voltage power transmission and distribution projects. Its publication marks clearer regulatory reference for corrosion and fire resistance of cable trays.
2. Revision of JB/T 10216 Cable trays for electrical control and distribution
The industry standard JB/T 10216 completed its review process. The new version replaces the 2013 edition, updating technical requirements, material requirements, structural requirements, and test methods, and specifically adds test requirements for wire mesh metal cable trays. This revision directly responds to the increasing use of mesh trays in data centers, PV, and other applications.
3. IEC 61084-2-4:2017+AMD1:2024
The International Electrotechnical Commission released the consolidated version 2.1 of IEC 61084-2-4 in 2024, specifying requirements and test methods for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation of insulated conductors, cables, and equipment for electrical and communication systems.
4. National Standard Design Standard for Photovoltaic Power Stations GB50797-2012 (2024 edition)
The 2024 edition maintains strict provisions for cable laying, explicitly requiring that when control/communication cables are laid in the same trench as power cables, fire-resistant trunking or fire-resistant partitions shall be used, and imposes rigid requirements for fire compartmentalization and sealing measures in cable trenches.
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17