Solar PV Mid-Clamp Industry Annual Review: Market Boom, Technological Innovation, and Standard Upgrades Global PV Installations Exceed 530GW
2024-09-23
Global PV Installations Exceed 530GW in 2024, Driving Surge in Mid-Clamp Demand
In 2024, the global solar photovoltaic industry continued its rapid growth trajectory. According to industry statistics, global newly installed PV capacity reached a record 530GW in 2024, a year-on-year increase of 35.9%. This drove a sharp rise in demand for various connection components within PV mounting systems. As a core connecting piece between PV modules and mounting rails, the mid-clamp accounts for a tiny fraction of system costs, yet its performance directly impacts the safety, stability, and service life of PV systems for over 25 years.
Market data shows that the global end-clamp and mid-clamp market was approximately US2.1 billion by 2030, representing a compound annual growth rate (CAGR) of approximately 7.9% from 2024 to 2030. The global solar fastener market was valued at around US5.2 billion by 2030, with a CAGR of 7.2%. Regionally, the Asia-Pacific region dominated the global mid-clamp and fastener market with a 58% share, driven primarily by China and India. Europe and the Americas together accounted for about 30%, while emerging markets such as the Middle East and Latin America posted annual growth rates exceeding 7%.
Mid-clamps are primarily used to connect two adjacent PV modules, maintaining an appropriate gap to allow for thermal expansion and contraction while preventing module collision or displacement. Currently, the mainstream mid-clamps on the market are made of anodized aluminum alloy 6005-T5 or 6061, paired with stainless steel bolts and EPDM rubber gaskets, balancing strength, corrosion resistance, and ease of installation.
Installation Efficiency Revolution: Bottom-Mounted Clamps Disrupt Traditional Design
In 2024, installation efficiency emerged as the primary driver of innovation in mid-clamps. Polish company Energy5 took the lead in March 2024 by launching a revolutionary bottom-mounted mid-clamp and end-clamp solution, which has been registered with the Polish Patent Office. The core value of this innovative design is that installers no longer need to hold the clamp and screw from above the module; instead, pre-assembly work is done from the bottom. This completely eliminates the risk of installers having to support their weight or step on the panel surface, effectively reducing micro-cracks caused by installation operations.
Cezary Rutkowski, Technical Director of Energy5, stated: "Clamps mounted from the bottom of the module not only speed up installation but also simplify maintenance, improving the safety and durability of the entire system." According to industry feedback, the bottom-mounted design can improve installation efficiency by 20%-30% while significantly enhancing on-site safety. The product uses high-quality Magnelis® coated steel from ArcelorMittal, paired with stainless steel fasteners, ensuring long-term outdoor durability and excellent corrosion resistance.
Meanwhile, Chinese PV mounting manufacturer Huge Energy released a new C-shaped galvanized aluminum-magnesium-zinc steel mounting system in December 2024, featuring a patented portable clamp design claimed to increase system strength by 20% and reduce installation time by up to 70%. The portable clamp can be placed at an angle (between 0 and 45 degrees) and can rotate to accommodate both mid-clamp and end-clamp applications. The system uses zinc-aluminum-magnesium coated steel, known for its excellent corrosion resistance and self-healing properties, providing a service life of over 35 years in harsh environments.
On the domestic front (China), Trina Solar obtained a patent in October 2024 for a "clamp for mounting PV modules and a PV module mounting structure". The clamp features an innovative snap-fit structure with three major advantages: fast installation enabling mechanized construction and shorter timelines; increased contact area between the clamp and fastener for better reliability; and the snap-fit design prevents loosening, reducing later maintenance costs. Suzhou Botian New Energy obtained a patent in November 2024 for a "mid-clamp plate mechanism for a solar panel". By incorporating a spring on the bolt, the design allows adjustment of the solar panel's position without removing the clamp plate and effectively prevents loosening under pressure.
Patent Technology Innovation: Integrated Grounding and Three Directions of Structural Optimization
In 2024, there was a surge of patent innovations in the mid-clamp field, mainly focused on three areas: integrated grounding, adjustable design, and structural strength enhancement.
In integrated grounding technology, SOLAR FOUNDATIONS USA obtained a U.S. patent (No. 12,018,862) on June 25, 2024, titled "Integrated Grounding Mid-Clamp Device, System and Method". The core innovation of this patent is a deformable toothed washer that can penetrate the anodized layer of the solar module frame to achieve a reliable electrical connection. The deformable toothed washer can be deformed without preventing normal contact between the mid-clamp and the module frame, ensuring stable and reliable grounding. This technology effectively solves the extra cost and installation steps of traditional solutions requiring separate ground wires, simplifies the installation process, and improves the electrical safety of the system.
In terms of safety certifications, the importance of the UL 2703 standard became even more prominent in 2024. As a key safety standard for PV mounting systems in the North American market, UL 2703 covers support devices, clamps/fastening devices, and grounding terminals, applicable to PV module systems with a maximum system voltage of 1500V. In March 2024, Sun Ballast's PowerClamp mounting system officially received UL 2703 certification. The system is made of SUS304 stainless steel and uses metal "teeth" to bypass the anodized layer of the module frame for rapid electrical connection. Tests showed the clamp can withstand wind and snow loads up to 200kg/m² and pull-out resistance of 500kg. In December 2024, GameChange Solar's rectangular head bolt design also received UL 2703 certification; this patented bolt effectively prevents pull-out under extreme high-wind conditions.
Regarding environmental sustainability and green manufacturing, the solar clamp industry accelerated its transition in 2024. Factories widely adopted robotic welding, precision extrusion, and AI-assisted design, reducing material waste by up to 19%. The use of low-carbon "green aluminum" (smelted using renewable energy) and recycled aluminum continued to increase in the industry. Some companies achieved material utilization rates of 92%, and aluminum clamp materials have a recycling rate as high as 89% at end-of-life. In agrivoltaics, demand increased for specialized clamps suitable for high-mounted structures, requiring greater ground clearance, better corrosion resistance, and stability for livestock-friendly environments.
New Material Exploration: 3D Printed Clamps Open a Distributed Manufacturing Path
In May 2024, a research team from Western University in Canada published innovative research on 3D-printed solar module mounting mechanisms in the journal Renewable Energy. They proposed, for the first time, a 3D-printed clamp solution for front-surface PV module installation on wooden mounting structures.
The team designed four types of mounting mechanisms—square shims, H-shaped shims, U-shaped clamps, and T-shaped clamps—and used three common printing materials (PETG, ASA, and PC) for finite element analysis simulations, followed by physical fabrication and field testing. Among all designs, the T-shaped clamp exhibited the best stress performance, with a maximum stress of 34.27 MPa on the aluminum frame. All designs had von Mises stresses within allowable limits, proving the clamping technology could be applied to future practical installations.
A financial analysis showed that the 3D printing solution could save up to 66% in costs. The research team noted that wooden mounting structures are particularly suitable for ground-mounted agrivoltaic projects, offering advantages such as ease of distributed manufacturing, lower material costs, and no corrosion or rust issues. "The introduction of 3D-printed clamps for front-surface solar module installation on wooden mounting structures is groundbreaking," the researchers pointed out. This research demonstrates the flexibility of 3D printing in renewable energy applications, providing a cost-effective new solution for PV installation in rural areas and resource-constrained settings.
Raw Material Pressure and Industry Consolidation: 15% Aluminum Price Increase Drives Technology Upgrades
In 2024, the mid-clamp industry faced significant price pressure from upstream raw materials. Data showed that primary aluminum prices rose 15% year-on-year in 2024 to an average of US$2.05/kg; energy costs for electrolytic aluminum increased by 12% due to rising global natural gas prices, squeezing profit margins for clamp manufacturers. Market competition remained intense, with average selling prices for clamp products showing a downward trend in 2024, decreasing by approximately 6.5%. However, leading companies with economies of scale and supply chain efficiency managed to keep price reductions below 3%, further highlighting their competitive advantages.
It is worth noting that the solar clamp (fastener) market is relatively fragmented, with the top ten global companies holding only about 26.0% market share. Major global manufacturers include international brands like EJOT, ARaymond Energies, All-Pro Fasteners, as well as Chinese companies such as Xiamen Siying New Energy Technology and Jiaxing Qunbang Hardware.
European policy incentives also positively impacted the mid-clamp market. Germany's KfW 442 program provides a 35% subsidy for installations using non-penetrating, roof-friendly clamping systems, driving market preference for such products.
Standard System Improvement: Multiple Group Standards Released in 2024
2024 saw accelerated improvements in the standard system related to PV module frames and clamps in China. Several group standards were released and implemented in 2024, providing strong support for the standardized development of the industry.
On November 25, 2024, T/JSQA 202-2024 "Aluminum alloy extruded profiles for PV module frames" was officially implemented. This standard applies to anodized aluminum alloy profiles for PV module frames, specifying terms and definitions, classification and marking, raw material requirements, test methods, and other complete technical content. Around the same time, T/SHLX 005-2024 "Aluminum alloy extruded profiles for solar cell frames" was released, jointly drafted by Mingdi Group, Zhejiang Yuexiang Aluminum, Guangdong Weiye Aluminum, and other companies. On December 17, 2024, T/ACCEM 427-2024 "Frames for PV modules" was released, taking effect on December 31
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17