Solar Panel Clips: 2024-2025 News Roundup
2025-02-15
1. Installation Efficiency Revolution: Snap-Fit and Bottom-Mounting
1.1 VesprSolar: Snap-in clamps eliminate nut-bolt mounting
At Intersolar Europe 2025, US-based VesprSolar introduced its V-Clamp and V-MAX series mounting clamps, designed to replace traditional bolt-based mounting. The clamps attach using standard pliers, eliminating precise torque settings and reducing the risk of over-tightening. Independent third-party testing showed that for a 1 MW project, VesprSolar clamps required only 37.8-38.9 manhours versus 104.3 manhours for traditional nut-bolt mounting, reducing installation time by nearly 64%. The V-MAX clamp also withstood axial forces up to 4.45 kN compared to 2.6 kN for M8-bolt-based variants, and endured 887 unbalanced load cycles versus 245 for bolt-mounted modules. The clamps feature a threaded groove design that ensures equipotential bonding between the anodized aluminum frame and mounting structures.
1.2 ARaymond: Anti-theft clips with 30-second module fixing
ARaymond supplied its PowAR Cinch® fixing clips to the 5 MW UFV Beira Rio plant in São Paulo. The clips perform both fixing and grounding in a single click, taking just 30 seconds to fix a module with three people, enabling 1 MWp installation in four days. They require no special tools—only a nylon hammer—and eliminate the need for periodic torque maintenance throughout the installation‘s life. Importantly, the clips allow fixing panels from the bottom, eliminating ladders, scaffolding, and the risk of walking on panels.
1.3 Energy5: Patented bottom-mounted clamps
In March 2024, Polish manufacturer Energy5 became the first in Poland (and likely internationally) to introduce a patented set of end and middle clamps for mounting panels from the bottom of the module. The spring-loaded adapter allows easy positioning in rail slots, with special holes for precise adjustment using a socket wrench. This eliminates the need for installers to support themselves on modules, reducing damage risk and significantly speeding assembly.
1.4 S:FLEX: Clip roof hook for pitched roofs
S:FLEX presented its new Clip roof hook at Intersolar 2024, a screwless version specifically developed for the Netherlands and Scandinavia. Made entirely of aluminum, it flexibly adjusts to roof batten and tile thicknesses from 49.7 mm to 59 mm. An EPDM clip ensures optimum pressure distribution on the underside, preventing tile cracking. The rail mounting with hammerhead screw offers height compensation of up to 21 mm for uneven roof surfaces.
2. Cable Management Clips: Adapting to Box-Frame Panels
2.1 BirdBlocker CableFixPro: Universal compatibility for box-frame panels
At Intersolar 2024, Netherlands-based BirdBlocker launched CableFixPro, a tool-free cable management clip range compatible with both traditional and box-frame solar panels. The company measured frames from 113 brands in 2023 and found that 63% of frames have a box-design on the short side, rendering traditional edge-clamp clips incompatible. CableFixPro clips are made from NS-coated stainless steel spring wire, hold two 6-8 mm cables, and come with a 10-year warranty. They comply with IEC and British Standards.
2.2 K2 Systems: 4 Wire Dragon Clip
K2 Systems introduced the 4 Wire Dragon Clip, a stainless steel clip that attaches directly to the PV module frame, eliminating the need for zip ties or various cable clips in both railed and rail-less systems. Its UV-resistant nylon body protects cable insulation from sharp edges, and it holds either four PV cables or two Enphase Q cables.
3. Structural Clamps: Strength and Stability Enhancements
3.1 S-5! CP Clamp: New carport attachment solution
In November 2025, S-5! introduced the S-5-CP clamp for solar carport applications, designed to fit both Cee and Zee purlin-framed structures. It delivers secure, non-penetrating attachment with a bottom-oriented setscrew allowing installation from beneath the canopy. Paired with S-5!‘s PVKIT rail-less solution, it minimizes parts and labor costs. An EPDM gasket ensures water-resistant performance between modules. Torque for 16-gauge steel is 18-20 Nm. The clamp gives engineers the flexibility to design custom systems, reducing costs without sacrificing performance.
3.2 Sunballast PowerClamp: UL 2703 certified
Sunballast‘s new PowerClamp bracket, made from durable stainless steel 304, provides secure panel attachment against wind and snow stresses. It has UL 2703 certification and features metal teeth for easy electrical bonding, bypassing module frame anodization. Tests show it withstands wind and snow loads up to 200 kg/m² and extraction loads of 500 kg.
4. Anti-Loosening and Slip Prevention Technologies
4.1 Jiangsu Rituo Photovoltaic: Anti-slip frame and clamp patent
In December 2024, Jiangsu Rituo Photovoltaic Technology applied for a patent for an anti-slip PV module frame structure and installation clamp, designed to significantly reduce installation breakage rates for large-format laminated components. The design retains high conversion efficiency while improving load-bearing capacity and can replace traditional clamp functions.
4.2 Xifu Electric: Corner protection clamp
Xifu Electric Technology obtained a patent for a PV module installation clamp featuring a protective gasket that creates a water-drainage gap between the top plate and module surface, reducing bolt-induced wear while allowing adaptive clamping along the corners of the frame and module, providing protective fixation for all four corners.
4.3 Risen Energy: Guided clamping device
Risen Energy obtained a patent for a clamping device where first and second clamping blocks move along guide surfaces, ensuring adjacent PV module edges are securely clamped while maintaining installation stability.
5. Integrated Grounding: Simplifying Electrical Safety
Several 2024-2025 innovations integrate grounding directly into clamps, eliminating separate bonding wires:
| Product | Grounding Feature |
|---|---|
| ARaymond PowAR Cinch® | Fixing and grounding in a single click |
| Sunballast PowerClamp | Metal teeth bypass module frame anodization for easy electrical bonding, UL 2703 certified |
| VesprSolar V-Clamp/V-MAX | Threaded groove design ensures equipotential bonding between frame and mounting structures |
| Energy5 bottom-mounted clamps | Integrated grounding as part of patented design |
6. Emerging Applications: Facade and BIPV Clips
Fischer PV Clip for building facades
Fischer‘s new photovoltaic clip secured 303 solar modules (380 W each, total 115 kW) to the facade of an existing building in the northern Black Forest. Used in a system with a hot-dip galvanized steel profile substructure and FSMN M8 R sliding nuts, the clip achieves minimal joints between modules, creating a more homogeneous surface than classic clamping solutions. The constraint-free installation and load-optimized design ensure technically flawless implementation.
7. 2024-2025 Industry Trend Summary
| Trend Direction | Key Developments |
|---|---|
| Bottom-mounting clamps | Energy5 (Poland) patented bottom-mount; ARaymond bottom-fix from underneath |
| Snap-fit / tool-less installation | VesprSolar V-Clamp/V-MAX (standard pliers); S:FLEX screwless roof hook |
| Integrated grounding | ARaymond, Sunballast, VesprSolar – UL 2703 compliance without separate bonding |
| Anti-theft design | ARaymond PowAR Cinch® with tamper-resistant fixing |
| Corrosion protection | S-5! non-penetrating clamp (no drilled holes); stainless steel 304/316 options |
| Box-frame compatibility | BirdBlocker CableFixPro (63% of frames box-design) |
| Facade/BIPV applications | Fischer PV clip for building-integrated solar |
| Enhanced mechanical strength | VesprSolar V-MAX: 4.45 kN axial force vs 2.6 kN for bolt-based |
| Higher wind/snow resistance | Sunballast PowerClamp: 200 kg/m², UL 2703 certified |
8. Outlook
The solar panel clip market is moving decisively toward:
Faster installation – Snap-fit and bottom-mounting designs reducing labor time by 60-70%
Integrated functionality – Combining mechanical fixation, grounding, and cable management
Adaptability to evolving module designs – Box-frame compatibility becoming essential
Simplified compliance – UL 2703 certified grounding integrated into clamps
Reduced maintenance – Elimination of periodic torque checks
New applications – Facade clips and BIPV solutions
As modules grow larger (600W+) and installations become more demanding, the humble clip continues to evolve from a simple fastener into an intelligent, multi-functional component essential for solar system reliability and efficiency.
Next
Next
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17