Solar PV Mounting System Industry Annual Review: Scale Growth, Technological Upgrades, and Accelerated Global Expansion
2024-09-07
1. Market Size: Global PV Mounting Systems Reach a New Threshold
According to a report released by Dongguan Securities Research, the global tracker market was valued at approximately RMB 79.7 billion in 2024, with a global tracker penetration rate of about 52%. With continuous iteration of tracking technology and declining costs, the penetration rate of tracking systems still has significant room for improvement. Assuming the global tracker penetration rate rises to 64% by 2027, the global tracker market size is expected to reach RMB 116.3 billion, representing a compound annual growth rate (CAGR) of about 13.4% from 2024 to 2027.
Data from global market research firm GM Insights shows that the solar PV mounting system market reached approximately US$44.5 billion in 2024 and is expected to grow at a CAGR of 4.4% from 2025 to 2034. The acceleration of large-scale solar projects, increasing policy support for clean energy in various economies, and the growing popularity of modular, pre-assembled mounting products are key drivers of market growth.
From an industry structure perspective, fixed and tracking mounts are developing in parallel, but tracking mounts are gradually increasing their market share due to higher power generation efficiency. According to Wood Mackenzie, global tracker shipments increased 20% year-on-year to 111 GW in 2024, exceeding 100 GW for the first time. This milestone marks a new development phase for the PV mounting industry globally.
2. Technological Innovation: Intelligent Tracking Standardization and Flexible Mounting Scale-up
2.1 Smart Tracking Technology Enters Standardization Era
One of the most notable events in tracker technology in 2024 was the release of China's first standard for smart tracking performance test methods. In September 2024, the China Photovoltaic Industry Association officially approved and released "T/CPIA 0082—2024 Test Method for Smart Tracking Performance of PV Trackers." This standard was led by Trina Solar and jointly developed by 15 mounting system companies, third-party organizations, design institutes, and universities. It took effect on September 15, 2024. The standard specifies requirements for high‑scattered‑irradiance weather optimization, backtracking optimization, and bifacial module optimization, providing plant owners with an industry benchmark to evaluate tracker value.
Smart tracking technology builds on conventional tracking algorithms, adjusting angles in real time based on weather conditions, adapting to uneven terrain to reduce shading losses, and optimizing angles according to the generation characteristics of bifacial modules, thereby further improving system output. The closed‑loop smart tracking algorithm "bifacial modules + trackers + inverters" launched by companies such as Renzhu Intelligent can increase generation by 3% to 10% under complex weather conditions compared to conventional astronomical algorithms, validated through smart algorithm test platforms and field measurements.
2.2 Flexible Mounting: From Emerging Technology to Large‑Scale Application
Flexible PV mounting systems, with their advantages of large spans, high clearance, fewer piles, and low environmental impact, reached a milestone for large‑scale deployment in 2024. As of April 2024, the cumulative order volume for the three‑cable space frame flexible PV mounting system of representative flexible mounting company Huiyao Pinshang Energy Technology exceeded 3 GW. Applications include hilly agri‑PV, fishery‑PV, coastal mudflats, desert‑gobi, and commercial/industrial distributed PV, winning recognition from major owners such as China Energy, SPIC, Huaneng, Datang, Huadian, Three Gorges, and CGN.
Among major projects, the 940 MW fishery‑PV project of Hengdian Group Dongci (Dmegc) in Ganyu District, Lianyungang, Jiangsu Province—China's largest single fishery‑PV project—uses 650 MW of ATEC Qingtiansuo cable‑supported flexible mounting. It achieves a large span of 40 meters and a clearance of not less than 4 meters, enabling a hybrid model of "power generation above water, aquaculture below." The project also extensively uses five‑cable flexible mounting with wind‑induced vibration suppression technology to ensure system stability and safety, offering significant advantages over conventional fixed mounts, such as fewer piles and larger spans.
In terms of technological innovation, LONGi has obtained a patent for an anchor structure for flexible PV mounts (CN 222122134 U), and Jiangsu Dongruan Intelligent has obtained a patent for a new composite space PV mount, indicating increasing R&D investment in flexible mounting systems. Huiyao Pinshang Energy Technology also participated in the drafting of the National Energy Administration industry standards "Design Code for Flexible PV Support Power Generation System" and "Technical Code for Cable‑supported PV Mounting Structures," actively promoting standardization.
3. Application Expansion: From Ground‑Mounted Plants to Full‑Scenario Deployment
3.1 Agri‑PV and Animal‑husbandry PV: Synergy Between Solar and Land Use
In 2024, "PV+" models such as agri‑PV and animal‑husbandry PV were widely promoted. Trina Solar's Pioneer 2P trackers appeared at the Rangitaiki farm in New Zealand. With a tracker height of 2 meters, the system minimizes impact on grassland growth, and the wide spacing between module rows provides ample space for livestock, achieving both power generation and grazing benefits.
In China, Ningdu County, Jiangxi Province, implemented an agri‑PV project following the design concept of "power generation on panels, farming below, scientific development, and comprehensive utilization." The project consolidates small scattered plots into centralized large fields and specifies mounting height and spacing standards to ensure sufficient agricultural space. Dynamic monitoring and tracking of PV panels according to sunlight angles not only increase generation but also benefit crop growth below.
The Three Gorges Group's Fuxian PV power station uses a combination of modules installed on livestock shed roofs and high‑clearance ground mounts, creating wide space for livestock under the panels and achieving "animal‑husbandry and solar" benefits.
3.2 Offshore PV and Floating PV: A New Frontier
In 2024, offshore PV technology achieved breakthrough progress. At the 17th SNEC Shanghai exhibition, Mibet showcased its offshore floating PV demonstration system. The G5A floating system adopts an "HDPE plastic pontoon + aluminum alloy rail" structure; the floaters are recyclable and environmentally friendly, and the modular design facilitates mass replication and installation. Mibet also shared half‑year empirical data from its nearshore floating PV demonstration project. The G4N floating system uses all HDPE material for the mounting structure, offering tensile strength, corrosion resistance, and low water absorption.
DAS Solar independently developed high‑performance aluminum‑like composite float materials, making floating offshore PV grid parity possible. In the flexible mounting field, DAS Solar launched a fourth‑generation flexible PV system solution using pre‑stressed cables to support modules, greatly improving wind‑resistance performance.
3.3 Fishery‑PV: Large‑span Flexible Mountings Become Mainstream
Flexible mounting systems have been particularly prominent in fishery‑PV applications. The 940 MW fishery‑PV project, China's largest single fishery‑PV project, uses ATEC Qingtiansuo cable‑supported flexible mounts from Shenzhen Antai Technology. Designed to withstand typhoons in coastal areas, the project is advanced in technical solutions, equipment, material selection, and structure. After completion, the average annual power generation is expected to be 16.09 billion kWh, saving 496,400 tonnes of coal annually. This model fully utilizes fishpond areas, organically combining PV power generation with aquaculture, creating a "new sample" of clean energy development.
DAS Solar's 70 MW fishery‑PV project in Ding'an County, Hainan Province (one of Hainan's first fishery‑PV projects using flexible mounts) successfully withstood Typhoon "Yagi" (Category 17), further verifying the safety of flexible mounts under extreme weather.
4. Accelerated Global Expansion: Chinese Mounting Companies Achieve Breakthroughs Overseas
4.1 Arctech: Global Ranking Jumps to Second, Major Overseas Orders
2024 was a fruitful year for Chinese PV mounting companies expanding overseas. According to Wood Mackenzie, Arctech's global tracker shipment ranking jumped from sixth in 2023 to second in 2024. Trina Solar maintained sixth place globally, ranking among the top five in key markets including Europe, Latin America, and the Middle East.
In terms of project orders, Arctech saw its hand‑held orders surge by RMB 3.46 billion (up 107.82%) by the end of June 2024, supported by overseas orders in the Middle East and Africa reaching RMB 2.307 billion and orders in India (East Asia region) reaching RMB 2.225 billion. Total overseas project orders reached RMB 5.266 billion. Specific projects include the signing of the Saudi Haden 2.3 GW PV plant cooperation with China Energy Engineering Corporation, where all trackers are the SkyLine II system. Previously, the 1 GW Uzbekistan PV project (the first major Chinese‑funded new energy project after the 2023 China‑Central Asia Summit) used Arctech's dual‑row multi‑point parallel drive "SkyWings" tracking system, which operates from -20°C to 60°C, adopts the industry's first dual‑row multi‑point parallel drive technology, and uses a near‑zero‑degree wind protection strategy to reduce damage from severe weather.
4.2 Trina Solar: Accelerated Overseas Layout, Factory in Brazil
Trina Solar expects its 2024 mounting system shipments to increase by about 50% compared to 2023, with overseas mounting demand projected to grow by more than 20% in 2024. To address uncertainties from geopolitical factors, Trina Solar is strengthening local presence: a mounting system factory in Brazil has been completed; a 1 GW cell and 1 GW module joint venture with Indonesia's state electricity company is under construction; and a tracker factory in the US is in site selection.
4.3 Global Markets Blossom
In Southeast Asia, Guoqiang Xingsheng completed the delivery of the first batch of PV mounting pile foundations for the Terra Phase I West 1.4 GW PV project, the largest photovoltaic plus storage project in Southeast Asia. The total project capacity is 3.5 GW PV + 4.5 GWh storage, making it the world's largest single PV‑storage project. By the end of 2024, Guoqiang Xingsheng had cumulatively manufactured and installed over 140 GW of PV mounting systems.
5. Policy, Standards, and Financing Updates
5.1 Favorable Policy Environment
In 2024, many countries introduced policies favorable to the PV industry. The EU adopted the Net‑Zero Industry Act, establishing "renewable energy acceleration areas," aiming for at least 30 GW of PV manufacturing capacity by 2030, and through the Energy Performance of Buildings Directive, requires all new buildings to be solar‑ready. These policies are expected to create sustained demand for PV mounting products. In China, state policies promoting land utilization and improving standards for PV project land use have provided a policy foundation for differentiated applications such as agri‑PV and fishery‑PV.
5.2 Industry Standards and Specifications
In addition to the smart tracking performance test method standard, several other group standards made significant progress in 2024, providing technical norms for healthy and orderly industry development. The preparation of industry standards for flexible PV mounts has also entered a critical phase, laying the foundation for large‑scale application of flexible systems.
5.3 Capital Continues to Favor PV Mounting
In May 2024, flexible PV mounting system pioneer Huiyao Pinshang Energy Technology announced the completion of over RMB 100 million in Series A and A+ financing. The round was led by Fortune Capital, with participation from Zero2IPO Capital and Nuotie Asset, primarily for R&D of new flexible PV mounting systems, construction of smart manufacturing bases, and domestic and international market expansion. This financing reflects capital's long‑term optimism in the PV mounting segment, especially in flexible systems with technical barriers and differentiated competitive advantages.
6. Outlook and Opportunities
Looking ahead, the PV mounting industry will face several key trends:
First, deeper technology integration. Deep integration of smart tracking algorithms with AI will further increase power generation gains from tracking systems; the combination of bifacial modules and trackers will become mainstream; and collaborative optimization among inverters, modules, and mounts will be a new direction for efficiency improvement.
Second, continued application expansion. As land resources become scarcer, differentiated scenarios such as agri‑PV, fishery‑PV, and offshore PV will demand more diverse mounting systems. Flexible PV mounts, with their large span and high clearance advantages, will gain wider application in "PV + agriculture" and "PV + aquaculture."
Third, global competition shifting from product export to global industrial chain localization. Facing geopolitical and trade policy uncertainties, leading companies will accelerate overseas manufacturing bases, moving from simple mounting product exports to local industrial chain deployment.
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17