2024-2025 Rooftop Mounting Systems Industry News Roundup
2025-02-18
1. Metal Roof Mounting Systems: Rail‑less Clamps Receive Hurricane‑Zone Certification
Metal roofs are an important application scenario for commercial and industrial distributed PV. In 2024‑2025, rail‑less clamp systems achieved major breakthroughs in extreme‑weather adaptability and installation efficiency.
S‑5! PVKIT 2.0 Receives Florida High‑Velocity Hurricane Zone (HVHZ) Approval
In October 2025, S‑5!‘s PVKIT 2.0 rail‑less roof mounting system received Florida Product Approval for High‑Velocity Hurricane Zones, enabling deployment in extreme wind‑speed areas. The rail‑less system uses micro‑clamps that grip metal roof seams and WEEB grounding components to integrate installation and grounding. The MidGrab unit (between two modules) has an uplift capacity of 861 lb, and the EdgeGrab unit (at module edges) 353 lb. A 50 kW system requires only 149 lb of racking components, compared to 970 lb for a traditional rail‑based system. The solution uses 674 components at a cost of approximately $3,434, while a conventional rail‑based system would require 1,259 components at a cost of about $6,174, saving 29 labour hours. Additionally, S‑5! PVKIT HUR 2.0 received FM 4478 certification in 2024, withstanding wind uplift up to 150 psf.
Schletter FS Duo System Delivered to 100 MW Coastal Project in South Korea
In September 2025, Schletter Korea announced the completion of racking delivery for a 100 MWp coastal PV project in Dangjin, South Korea. The project is located on a 990,000 m² reclaimed saltwater site within a migratory bird protection area, where construction was restricted during winter. Racking was installed between November 2024 and May 2025, with only three and a half months of effective construction time. The Schletter FS Duo SRF6 system, combined with ETA2 and LC90 foundations, was specifically designed to meet the challenges of strong coastal winds, high salt exposure, unstable ground, and strict environmental regulations.
2. Flat Roof Mounting Systems: Fast‑Install and Ballasted Solutions Continue to Evolve
Flat roofs are the main application for commercial and industrial distributed PV. In 2024‑2025, this sector made progress in fast‑install efficiency, non‑penetrating designs, and safety certifications.
IBC AeroFix: Upgraded Non‑Penetrating Ballasted System
In September 2025, IBC SOLAR launched the new‑generation IBC AeroFix flat roof mounting system, which requires no roof attachment whatsoever and is suitable for membrane, asphalt, gravel, concrete, and green roofs. The system’s aerodynamically optimised design presses the system onto the roof under wind loads. Pre‑assembled self‑tapping screws and quick‑fit clamps simplify on‑site work, and wide‑base rails distribute loads over a large area, accommodating modules up to 3 m². The new version also supports quarter‑point clamping without additional approvals. IBC SOLAR offers a 15‑year combined warranty for mounting systems and modules.
Clenergy Ascent1.1: Snap‑Fit Design Improves Installation Efficiency
In December 2025, Clenergy showcased its Ascent1.1 flat roof PV mounting solution at the Solar Solutions Düsseldorf exhibition in Germany. The product features a unique snap‑fit design with integrated grounding and mid/end clamp functions. It has obtained wind tunnel test reports from I.F.I. in Germany, TÜV certification, and EU CE marking, combining aesthetics with high efficiency to set new benchmarks for PV installation.
Skyworth PV Ballasted Mount Patent: Avoids Roof Penetration
In August 2025, Shenzhen Skyworth PV Technology Co., Ltd. obtained a patent for a “Flat roof PV ballasted mount structure and system” (Authorization No. CN223194638U). The design uses ballast to secure the mount, avoiding roof penetrations that could damage the waterproof membrane, making it particularly suitable for industrial flat roofs where drilling is prohibited.
3. Flexible Mount Technology: From Mountainous Terrain to Typhoon Resistance
Flexible mounts, with their advantages of large spans, high clearance, and fewer piles, are rapidly gaining adoption in complex terrain and extreme climate scenarios.
DAS Solar Flexible Mount Withstands Category 17 Typhoon
In January 2025, DAS Solar‘s 70 MW fishery‑solar hybrid project in Ding’an Longhu, Hainan, received high praise from the project owner. In September 2024, the project successfully withstood Super Typhoon Yagi (maximum sustained winds near landfall of about 245 km/h, with the project only 50 km from the landing point) and continued to operate stably, demonstrating the excellent quality and reliability of DAS Solar‘s flexible PV mounting products.
HYPSET Flexible Mount Wind‑Resistance Research Wins Science and Technology Progress Award
In May 2025, HYPSET‘s research achievement “Key technology research and application of wind resistance for flexible PV mounts” won the Third Prize of the China Installation Association Science and Technology Progress Award, marking the transition of flexible mount wind‑resistance technology from R&D to engineering application.
Wuhan Tower Company Flexible Mount Technology Fills Large‑Scale Application Gap
In November 2025, Wuhan Tower Company‘s ultra‑large‑span flexible PV mount technology won the First Prize of PowerChina Science and Technology Progress Award. With its core advantages of large span, high clearance, and strong adaptability, the technology efficiently adapts to various complex terrains while minimising ecological damage to the ground surface, successfully filling a critical gap between R&D and large‑scale application of flexible PV mounts.
4. BIPV and Roof Integration: From “Add‑On” to “Native Protective Layer”
Building‑integrated photovoltaics entered large‑scale application in 2024‑2025, with PV modules evolving from a roof “add‑on” to a “native protective layer” of the building.
Megasol Launches LEVEL Up Roof‑Integrated System
In November 2025, Swiss BIPV solution provider Megasol launched the LEVEL Up system, optimised for pitched roofs and building facades, achieving full‑surface coverage that replaces traditional tiles or slates. The system uses frameless glass‑glass modules with a power density exceeding 200 W/m², lighter weight than previous generations, and fewer installation components. A skilled installer can install about 12 m² per hour. The system withstands snow loads of more than 4 m and hail up to 50 mm in diameter, suitable for alpine and high‑altitude regions.
LONGi BIPV Projects Withstand Typhoon
In October 2025, Science and Technology Daily reported that BIPV projects jointly developed by LONGi Green Energy and Center International Group had withstood Super Typhoon Jaksar and other extreme weather events, achieving “zero damage, no power outage.” Projects including Shenzhen Bao‘an International Airport B2 cargo area, Shenzhen Eastern Environmental Protection Power Plant, and Taishan Dishengli Aluminum Wheel manufacturing demonstrated BIPV systems that resist both typhoons and other extreme conditions such as vibration and heavy rain. LONGi’s flexible connection technology flexibly responds to stress impacts from strong winds, improving wind resistance by 23% compared to traditional PV solutions. The core philosophy is to transform PV from a roof “add‑on” into a building‘s “native protective layer,” delivering dual value of “power generation + protection.”
Center International Obtained Patent for Curved Roof BIPV System
In November 2025, Center International Group obtained a patent for a “Large‑span curved roof BIPV photovoltaic system,” marking the extension of BIPV technology to complex architectural forms.
5. Balcony Solar: Policy‑Driven Explosion in Europe
Balcony solar experienced explosive growth in 2024‑2025, becoming an important component of urban distributed energy.
German Policy Deregulation: 800 W Balcony Solar Plug‑and‑Play
Germany’s core policies exempt small PV systems (≤800 W) from registration and bidirectional meter requirements, allowing plug‑and‑play installation, with additional state‑level incentives (e.g., €500 per household subsidy in Mecklenburg‑Vorpommern). By the end of 2024, cumulative installations in Germany exceeded 800,000 units, and balcony solar accounted for over 40% of new PV systems in Germany. A basic balcony solar system costs about €600, saves approximately €230 per year on electricity bills, and has a payback period of only 2‑3 years.
WeiWang Optoelectronics “GuangYiFang” Four‑Link Balcony Mount
In December 2025, WeiWang Optoelectronics launched the “Four‑Link · Three‑in‑One” balcony PV mounting system – GuangYiFang. With its innovative structure and integrated pre‑assembled design, it redefines the balcony PV installation experience, bringing green energy easily into homes.
Skyworth PV Balcony Installation Device Patent
In June 2025, Shenzhen Skyworth PV Technology R&D Co., Ltd. filed a patent for a “Balcony PV installation device and PV system,” ensuring stable restraint between the balcony PV installation device and the balcony railing.
6. Tiled Roofs: Solar Tiles and Hook Technology Advance on Two Fronts
Tiled roofs are the main application for residential PV in Europe. In 2024‑2025, both solar tile products and hook installation technologies made significant progress.
GoodWe “Sunrise” Solar Tiles Light Up World‘s Largest Solar Tile Building
In May 2025, China Central Television (CCTV) reported that GoodWe’s “Sunrise” series solar tiles were used in the world‘s largest solar tile building – the Fangting Shuiyuan complex. The building’s annual power generation fully covers its own annual electricity demand, making it a near‑zero carbon landmark project and demonstrating the powerful effectiveness of solar tiles in the green transformation of buildings.
Risen Energy Green Power Tile Hanging Structure Patent
In January 2025, Risen Energy Green Power (Zhejiang) Building Materials Co., Ltd. obtained a patent for a “Tile hanging structure and PV roof system” that offers convenient installation. The patent application was filed in May 2024.
LONGi Green Energy Roof Structure Patent
In December 2025, LONGi Green Energy obtained a patent for a “Roof structure” that solves the problems of cumbersome tile installation and insecure fixation (Authorization No. CN223738863U).
7. Material and Structural Innovations: Lightweighting, Modularisation, Intelligence
In 2025, PV mounting systems showed three core development directions: pre‑assembled modular structures, tool‑free designs, and scenario‑specific customisation.
Pre‑Assembled Modular Solutions: Installation Time Reduced by 50%
Mainstream PV mounting solutions use pre‑assembled modular structures and tool‑free designs, requiring no heavy equipment and reducing on‑site installation time by 50%, while accommodating 700 W+ large‑format PV modules.
Rail‑less / Reduced‑Rail Designs: Material Cost Reduced by 10‑30%
Innovative module‑clamping technologies greatly reduce or even eliminate traditional transverse rails, directly saving steel/aluminium consumption and lowering material costs by 10‑30%, while dramatically simplifying installation steps, reducing bolt usage, shortening construction periods, and significantly lowering labour costs.
Bochuang Hanjin Flexible Mount Patent
In May 2025, Xiamen Bochuang Hanjin New Energy Co., Ltd. obtained a patent for a “Flexible mounting bracket for solar supports,” achieving flexible installation of large‑span PV panels through the cooperation of support piles, cable trusses, and steel cables – stable structure, strong tensile resistance, and avoiding large‑amplitude panel oscillation.
China Construction Third Bureau Centralised Fixed Mount Installation Platform Patent
In January 2025, China Construction Third Bureau filed a patent for a “Method of using a centralised fixed mount PV module installation work platform,” solving the construction difficulties of installing PV modules at height.
8. Market Data: Multi‑Billion Dollar Sector Continues to Expand
According to DIResearch, the global rooftop solar PV installation market will reach $15.818 billion in 2025 and is projected to reach $26.209 billion by 2032, with a compound annual growth rate (CAGR) of 7.48%. Rooftop solar PV installation involves solar panels, racking systems, inverters, wiring, and battery storage systems, and is increasingly popular in residential, commercial, and industrial buildings.
According to China Report Hall, in the first five months of 2024, domestic new PV installations reached 197.85 GW, a year‑on‑year increase of 150%. By the end of 2024, China‘s cumulative PV installations reached 890 GW, of which distributed PV cumulative installations reached 370 GW, accounting for 42% – nearly half of the total.
9. 2024‑2025 Rooftop PV Mounting Systems Technology Trend Summary
| Trend Direction | Key Developments | Representative Companies/Products |
|---|---|---|
| Rail‑less clamp hurricane‑zone certification | HVHZ approval, FM 4478 certification, 150 psf wind uplift | S‑5! PVKIT 2.0 |
| Fast‑install systems | Snap‑fit designs, pre‑assembled modules – installation time reduced 50% | Clenergy Ascent1.1, IBC AeroFix |
| Flexible mount breakthroughs | Category 17 typhoon validation, ultra‑large spans, technology awards | DAS Solar, HYPSET |
| BIPV large‑scale deployment | Zero typhoon damage, full‑surface coverage, curved roof patents | LONGi, Megasol, Center International |
| Balcony solar explosion | >800,000 units in Germany, policy deregulation, integrated pre‑assembly | WeiWang Optoelectronics, Skyworth PV |
| Solar tile commercialisation | World‘s largest solar tile building, near‑zero carbon landmark | GoodWe, Risen Energy, LONGi |
| Ballasted non‑penetrating | Avoids roof penetration, ballasted mount patents | Skyworth PV |
| Lightweight materials | Rail‑less designs, material cost reduction 10‑30% | Industry‑wide |
Rooftop PV mounting systems are transforming from traditional “add‑on installation” toward “building integration,” “non‑penetrating,” and “intelligent” solutions. Rail‑less clamp systems have proven their reliability under extreme weather through hurricane‑zone certifications. Flexible mounts, with spatial cable‑net structures, have conquered complex terrain challenges. BIPV technology has upgraded PV from a roof “add‑on” to a building‘s “native protective layer.” With policy deregulation and rapid adoption of balcony solar in Europe, together with sustained growth in Asian markets, rooftop PV mounting systems are entering a new era of greater safety, efficiency, and aesthetics.
Related Blog
A reliable solar panel mounting brackets for metal roof is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-20
Klip-Lok Clamps and L-Feet: solar panel corrugated roof mounting brackets That Preserve the Roof
A reliable solar panel corrugated roof mounting brackets is the foundation of a safe, long-lasting solar installation on flat and low-slope roofs
2026-11-17